Automatic Association Via Wps - THOMSON TG121n Setup And User Manual

Chapter 3
3.1

Automatic Association via WPS

WPS
Wi-Fi Protected Setup (WPS) allows you to add new wireless clients to your network in a swift and easy way,
without the need to enter all of your wireless settings (SSID, encryption,...).
Association methods
Following registration methods are supported by your Wireless USB Adaptor:
Push Button Configuration
You have to put both your Wireless USB Adaptor and access point in registration mode.
PIN code entry:
You have to enter a PIN code either on the Wireless Configuration Utility or your access point
Check the documentation of your access point to find out which of these methods are supported/
recommended by your access point. Thomson Gateways support both Push Button Configuration and PIN
code entry.
Requirements
Your access point must support WPS.
8
(PBC):
E-DOC-CTC-20080318-0006 v1.0