Table of Contents
Advertisement
DIGITAL CAR KIT OPERATION
When mounted in the Vehicle Adapter the radio may be operated in the
normal way using the external microphone and external PTT switch.
The radio internal audio is automatically disconnected and the received
audio routed via the Vehicle Adapter audio amplifier to the
external speaker or handset.
The loudspeaker volume is controlled by the radio volume control.
For all other operating procedures for your radio refer to your
Radio User Manual.
MAKING A TELEPHONE CALL
1.
Set the radio to phone mode (Refer to the Radio User Guide).
2.
Enter the desired telephone number or recall it from memory and
press and release the remote PTT button or Send key on the radio
keypad.
3.
When other party answers, speak into the remote directional
microphone to transmit audio.
4.
Incoming audio will be heard from the remote speaker.
MAKING A DISPATCH CALL - PRIVATE AND GROUP MODES
Note: For more details refer to Radio User Guide
1.
Set the radio to Private or Group mode.
2.
Dial the required number or recall it from the memory.
3.
For group call: Press and hold the remote PTT button.
For private call: Press and release wait for ring back tone.
4.
For group call: Wait until you receive a grant tone.
For private call: Audio will be heard, when receiving radio answers
call.
5.
In case of denial tone, release the PTT and repeat steps 3 and 4.
6.
Speak into the remote directional microphone to transmit audio.
7.
Incoming audio will be heard from the remote speaker once the PTT
button is released.
11
Advertisement
Table of Contents
