Motorola GMLN1040 User Manual page 11

The radio can now be turned ON by slowly turning the volume control
knob clockwise until an acceptable volume level is reached. When the
radio detects the Vehicle Adapter, a signal is audible and the radio
display shows "Car Kit Connected". Once the radio is in the cradle and
is turned ON and has detected the Vehicle Adapter, it is automatically in
the Hands-free mode and ready for use.
WHEN MOUNTED IN THE VEHICLE ADAPTER THE
FOLLOWING OCCURS:
1. The radio antenna is automatically disconnected and connection is
made from the radio via the Vehicle Adapter to the external vehicle
antenna.
2. The radio's microphone and speaker are automatically disconnected
and connection is made to the externally connected microphone and
speaker (if hardware is connected and the radio recognized the
Vehicle Adapter).
3. The radio battery is automatically connected to the battery charger
and charging commences.
The Vehicle Adaptor is permanently connected to
the vehicle battery. Be careful not to discharge the
vehicle battery by leaving the radio inserted or
allowing the radio to operate for extended periods of
time with the vehicle engine turned off.
Any radio and battery inserted in the Vehicle
Adapter is always actively connected to the
charging circuit regardless of whether the radio is
switched on or off.
9