Making And Receiving Calls - Motorola T605 Motomanual

English

Making and Receiving Calls

Note: Before you can use your Bluetooth-enabled phone, you must first create a paired link (see "Linking Your Car
Kit and Bluetooth Enabled Device").
The following table provides details for making and receiving calls from your connected phone using your car
kit:
Note: Some features are phone/network dependent.
Function
Make a Call (Hand Dial)
Make a Call (Voice Dial)
Redial Last Number
Receive (Answer) a Call
Change Call Volume
End a Call
Reject a Call
Mute/ Unmute aCall
Answer
Second Incoming Call
Reject
Second Incoming Call
Switch Between Two Calls On–in call, 2nd call On–indicator light
(Active and On Hold)
3-way Conference Calls
Transferring Call
from Car Kit to Phone
(Privacy Mode)
Transferring Call
from Phone to Car Kit
Change Ring Tone
Alert Tone Volume
10
Phone T605
On-in idle On
On-in idle On
On-in idle On
On–phone rings On–indicator light
flashes quickly in blue
On–in call On–indicator light
flashes slowly in blue
On–in call On–indicator light
flashes slowly in blue
On–phone rings On–indicator light
flashes quickly in blue
On–in call On–indicator light
flashes slowly in blue
On–in call, 2nd call On–indicator light
incoming flashes quickly in blue
until call is answered
On–in call, On–indicator light
2nd call incoming flashes quickly in blue
on hold flashes slowly in blue
On–in call, 2nd call On–indicator light
on hold flashes slowly in blue
On–in call On–indicator light
flashes slowly in blue
On–in call On
On–in idle On
Action
Enter phone number on phone, phone dials call.
Press and hold green button for 2-6 seconds, wait for
prompt from phone, speak name, phone dials call.
Press green button. Note: This feature is available only
in Connected mode.
Press green button. While call is active, indicator light
flashes slowly in blue. If music is playing, it is paused
when on a call.
Press blue (up arrow) button to increase or blue (down
arrow) button to decrease. Note: You can also adjust call
volume from your phone (if supported by phone).
Press red button. To end a call on hold, press green
button to make call active, then press red button to end
call. If music was playing when call was answered, it is
resumed when call is ended.
Press red button.
Press MFB button. While muted, indicator light flashes
slowly in purple
Press green button, places first call on hold, answers
incoming call. When call is on hold, indicator light
flashes quickly in blue.
Press red button.
Press green button.
Press and hold MFB button for 2-6 seconds.
Press and hold green button for 2-6 seconds.
Note: Some phones require you to press and hold the
MFB button twice.
Press and hold green button for 2-6 seconds.
Note: Some phones require you to press and hold the
MFB button twice.
Press blue (up arrow/down arrow) buttons.