Battery Voltage - Motorola GMLN1040 User Manual

EUROPEAN UNION DIRECTIVE OF CONFORMANCE
STATEMENT
This product is in conformance with the requirements of the applicable
Council Directive 95/54/EC.

BATTERY VOLTAGE

The product is suitable for motor vehicles with a 12 volts electrical
system having negative earth only. For use in a 24 volts system an
approved separate 24V/12V DC/DC converter must be connected
between the vehicle battery and the digital car kit. For installation refer
to the separate installation instructions of the DC/DC converter. The
equipment must be installed according to the recommendations of the
Installation Manual and the vehicle manufacturer.
PREPARING THE PORTABLE RADIO FOR USING IN
THE VEHICLE ADAPTER
Before the radio can be used in the Vehicle Adapter it must be fitted with
an RF Switch adapter to allow for the automatic switching from integral
to external antenna. The RF Switch adapter fits between the portable
radio antenna socket and the portable radio antenna.
When the radio with the RF Switch adapter fitted is placed into the
Vehicle Adapter, the resulting combination operates as a mobile radio.
The following functions occur automatically:
• The radio antenna is electrically disconnected and the vehicle
antenna is connected for use.
• The radio internal microphone is electrically disconnected and the
Vehicle Adapter mobile microphone is connected for use.
• The Vehicle Adapter charger is connected to the radio battery.
• The Vehicle Adapter will automatically mute the radio internal
speaker and route received audio to the external speaker. The audio
level of the speaker is set by the radio volume control setting.
When using an external speaker, turn the volume
control up slowly to the desired audio level to avoid
damage from high audio pressures.
3