Chapter 5. Display Icon - Camera Placement And Display - Night Owl L Series User Manual

Night Owl L / TL / P / WMC Series Manual
CHAPTER 5— CAMERA PLACEMENT AND DISPLAY
Placement: Night Owl cameras are intended for both indoor and outdoor use. Here are
some helpful tips when mounting your cameras after initial testing and configuration:
- Place cameras in areas with a largely unobstructed view.
- Even when equipped with night/low light vision, cameras should be located in
environments with ample lighting if possible.
- Cameras should be mounted away from moving objects that can interfere with
line of sight or cause damage if placed too close e.g. door hinges, ceiling fans,
etc.
Set Up:
Click [Display Icon] and [Live] tab and settings screen.
A. Channel - Select a channel for setup
B. Name - Assign names (up to 8 characters)
for each camera/channel in this field. E.g. Bed Room,
Office, Garage, etc.
C. Position: Set up display position of each channel
on the Live Feed screen. e.g. U-L= Upper Left.
D. Color: Adjust the Hue, Brightness, Contrast, and Saturation
E. Live View: [Enable] or [Disable] display depending on if you are monitoring in real
time or just recording.
F. Show time: [Enable] so that the time will appear on the Live Feed.
G. Record time: Enabling will allow you to enter the system time into the record history.
H. Copy: Copy all settings of one channel to another.
I. Click [Apply] to save your changes.
To cancel the modification, click [Exit] to exit the menu.
Clicking [Default] will erase any new settings and reset to factory system default values.
OUTPUT Configuration Settings
A. Video output: Supports CVBS (composite video) Output, LIVE-OUT is the output.
14