Rmon Collection Statistics - Zte ZXR10 Command Manual

Router/ethernet switch
Hide thumbs Also See for ZXR10:
Table of Contents

Advertisement

Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
buckets <bucket-nu
mber>
interval <seconds>
It is allowed to configure multiple history statistics items on
one interface.
It is allowed to delete history statistics items on one interface
in interface configuration mode.
If history items with the same<index> are created, the system
prompts error. It is necessary to cancel the configuration of the
original same indexes with the no form of this command.
If the non-existed index item is deleted, the system prompts
"Unknown bufferControl number".
If the memory or resource is unavailable, the system prompts
"Alloc buffer error or Resource unavailable".
Use this command to configure history group statistics on the 100
Mbps Ethernet interface. The sampling time is 300 seconds.
ZXR10(config)#interface fei_1/1
ZXR10(config-if)#rmon collection history 1 owner zte
buckets 100 interval 300
show rmon history

rmon collection statistics

Use this command to enable the statistics function of an interface
(applied to the Ethernet interface only). Disable the function with
the no form of this command.
Interface configuration
rmon collection statistics <index>[owner <string>]
no rmon collection statistics <index>
<index>
owner <string>
It is allowed to configure multiple statistics items on one inter-
face.
It is allowed to delete the statistics items of this interfaces in
interface configuration mode.
If statistics items with the same <index> are created, the sys-
tem prompts error. It is necessary to cancel the configuration
of the original same indexes with the no form of this command.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 RMON Configuration
The requested bucket size, which is 50 by
default. The system supports the size of 100
at maximum, in the range of 1~100
Sampling interval in seconds, in the range of
1~3600. The default value is 1800 seconds.
It is recommended to configure 30 seconds
for the short term network traffic change and
1800 seconds for the long term one
Index number, range: 1~65535
The creator of the statistics, with not more
than 30 characters. It is monitor by default
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents