Show Mpls Ldp Flap-Statistics Summary - Zte ZXR10 Command Manual

Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Field
d
InLable
OutLable
Network
From
Reuse
Penalty
show mpls ldp flap-statistics
summary
Use this command to show dampening information of LSP in LDP
flapping routes.
User EXEC and privileged EXEC
show mpls ldp flap-statistics summary [<ip-address><net-m
ask>]
<ip-address>
<net-mask>
If there is not any parameter after this command, all information
about LSP in LDP flapping routes is displayed. If there is a param-
eter after this command, dampening information of current LSP is
dispalyed.
This example describes how to show information about LDP .
ZXR10#show mpls ldp flap-statistics summary
Flap LSPS of ldp: 2
status codes: d damped , *
InLable OutLable Network
Reuse Penalty
d 17 3 25.25.25.25/32
00:00:58 2638
The displayed field descriptions are shown below.
Field
d, *, h
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 MPLS LDP Configuration
Description
The LSP is suppressed
Ingress label
Egress Label
NetworkIP address and mask length of LSP
LDP Router identifier of the remote neighbor
Time from the last time to receiving packets
to now
Penalty value. Values of LSP reuse and
suppression are decided by this value
Ntwork IP address related to dampening
information, in the dotted decimal format
Network mask, in the dotted decimal format
valid, h history.
NH From Flaps
20.1.1.25 25.25.25.25:0 2 00:00:13
Description
d implies this LSP is suppressed now. *
implies the current lsp exists in history link
list, and LDP is valid. h implies the current lsp
exists in history link list, and ldp is invalid
Duration
37