Computer Feet; Bluetooth Module - HP Compaq 6710s Maintenance And Service Manual

Computer feet

The computer feet are adhesive-backed rubber pads. The feet are included in the Plastics Kit, spare part
number 443905-001. There are 8 rubber feet in 2 different sizes. The feet attach to the base enclosure
in the locations illustrated below.

Bluetooth module

Description
For use with computer models in all countries and regions except Japan and Asia/Pacific (includes
Bluetooth module cable)
For use with computer models in Japan and Asia/Pacific countries and regions (includes Bluetooth
module cable)
Before removing the memory module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the Bluetooth® module:
Position the computer with the front toward you.
1.
Loosen the Phillips PM2.0×5.0 screw (1) that secures the Bluetooth module cover to the computer.
2.
54 Chapter 4 Removal and replacement procedures
Battery on page 48).
Spare part number
398393-002
450066-001
ENWW