Listening To Ipod; Connecting Ipod; Playing Back - JVC NX-SA1B Instructions Manual

Listening to iPod

Connecting iPod

You can operate iPod through the System.
• Do not connect or disconnect iPod when the
System is turned on.
1
Push PUSH OPEN to open the dock for
iPod.
2
Insert iPod directly to the connector pins.
• iPod is charged through the dock when the
System is turned on.
• When not connecting iPod, press the dock
for iPod to store it. The dock for iPod cannot
be stored, even by pressing, unless it is
already fully open.
• Be careful not to pinch your fingers when
you store the dock for iPod.
CAUTION
• You cannot send any data to iPod from the
System.
• Take the protect case of iPod off before
connecting.
• Keep iPod in a straight position while
connecting/disconnecting it.
• Connect iPod firmly.
• Do not carry the System with iPod
connected. Doing so might cause damage to
the dock or you might drop iPod.
• Do not touch or hit the terminal pins of
iPod or connector pins in the dock for iPod
directly. Doing so might cause damage to
the connector pins.
12

Playing back

iPod is turned on and starts playing.
To pause
To cancel pause, press the button again.
To select a track
/
(Press repeatedly)
To fast forward/reverse
/
(Hold)
Shuffle Playback
Each press switches the selection of iPod
shuffle songs.
Repeat Playback
Each press switches the selection of iPod
repeat songs.
To put iPod in sleep mode
(Hold)