Turning The Speaker Systems On And Off - Sony SAVA-27 Operating Instructions Manual

Home theater active speaker system
Hide thumbs Also See for SAVA-27:
Table of Contents

Advertisement

Turning the Speaker Systems
On and Off
Press POWER on the remote or the front speaker (left).
The front speaker ON/READY indicator lights green.
Power turns on and off automatically
(Auto power on/off function)
You do not need to turn the speaker system on every
time you use it . Three minutes after the sound source
goes off (when you turn off the TV, or the currrently
playing video/laserdisc ends), the speakers turn off
automatically and the ON/READY indicator turns red.
The speakers turn themselves back on the next time
you turn on the TV or start playback from the VCR.
z
If you press POWER when the speakers are on
The speakers switch to the standby mode (the ON/
READY indicator goes off), and the auto power on/off
function takes no effect. In this case, press POWER once
more, and wait until the ON/READY indicator changes
to red.
Note
If you are using this speaker system connected to an HCD-
VA550, depending on the mode of operation the auto power
on/off function may not operate.
Adjusting the contrast of the display
window
You can dim the display, or turn it off, according to
your preference.
Press DIMMER, on the remote, a few times until the
display mode you desire appears.
The display returns to full brightness temporarily
when you press one of the buttons on the remote.
Getting Started
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents