Using A Modem; Connecting A Modem Cable - HP Notebook pc User Manual

2. Plug the other end of the network cable into a network wall jack (2) or router.
NOTE:
interference from TV and radio reception, orient the circuitry end of the cable toward the
computer.

Using a modem

A modem must be connected to an analog telephone line using a 6-pin, RJ-11 modem cable. In some
countries or regions, a specific modem cable adapter is also required. Jacks for digital PBX systems
may resemble analog telephone jacks, but they are not compatible with the modem.

Connecting a modem cable

To connect the modem cable, follow these steps:
1. Plug the modem cable into the modem jack (1) on the computer.
2. Plug the modem cable into the RJ-11 telephone wall jack (2).
NOTE:
interference from TV and radio reception, orient the circuitry end of the cable toward the
computer.
22 Chapter 3 Connecting to a network
If the network cable contains noise suppression circuitry (3), which prevents
If the modem cable contains noise suppression circuitry (3), which prevents