Table of Contents
Advertisement
Removal and replacement procedures
Modem
Description
Modem 56K V.92 data/fax modem (select models only, for use in the United Sates)
Modem 56K V.92 data/fax modem (select models only, for use in Australia)
Before removing the modem, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive cover (see
Remove the modem:
1. Remove the 2 Phillips PM2.0×3.0 screws 1 that secure the modem to the computer.
2. Lift up the modem from the computer 2 and disconnect the modem cable 3 from the modem.
Reverse this procedure to install the modem.
4–16
"Battery" on page
4-7)
"Hard drive" on page
4-10).
Spare part number
510100-001
510100-011
Maintenance and Service Guide
Advertisement
Table of Contents
