Control Modules With Displays; To Remove/Install Display Module - Bosch SHI4302 Manual

VI. Component Access/Replacement
VI. Component Access/Replacement
Control Modules
Control Modules
SHY56A/66C
modules mounted on the front of fascia panels.
These instructions apply to
SHY56A & SHY66C models.
1
Removing door & fascia
4
Locking display in place
- SHY56A/66C Control Modules with Displays
- SHY56A/66C Control Modules with Displays
control modules

To remove/install display module:

Remove outer door & fascia panel.
Confirm the (4) pushbutton carrier display
latches are intact.
Route display wire harness through (door
latch) console opening, press harness onto
pushbutton carrier wire guide & connect
terminal.
Insert
pushbutton carrier), then push bottom of
display up and rotate it into bottom latches.
2
Checking display latches
have separate
display into
wire guide
3
latches
40
display
top latches
Connecting wire harness
(on