Contents Of The Xm4400 Machine Box; Unpacking And Assembling The Cart; Unpacking And Positioning The Machine - Xyron XM4400 Instruction Manual

Contents of the XM4400
The XM4400 is fully assembled and requires minimal set up other than unpacking the machine,
assembly of the cart, mounting the machine to the cart, plugging it in, and loading the film. You will find
the contents of the box to include:
1. XM4400 machine
2. In-Feed tray with paddle [3309]
3. Un-assembled cart components
a. (2) Rectangle Cross Bar [3346]
b. (2) Cart frame end pieces [3806]
c. (4) 1/4"-20" x 2.25" hex head bolts [3330]
d. (4) 1/4" washers [2143-02]
e. (4) 1/4" split washers [2189-04]
f. (4) 5/16"-18 Nylock nut – Black [3803]
g. (4) 5/16" Washer – Black [3804]
h. (2) 4" Swivel Caster [3808]
i. (2) 4" Swivel Caster W/ Brake [3809]
j. (4) Caster Mounting Bolt, 5/16-18 X 2.75" [3807]
k. (4) Caster Shoulder Bolt, 2.225" X .371" [3812]
l. (4) Lock Nut Nylon, .371" [3814]
m.
4. Tools included
a. (1) 3/16" Hex wrench for assembly [3352]
b. (1) 1/8" Hex wrench for sprocket / chain adjustment [3354]
5. Warranty card [XLT-PRO-01]
6. (2) Hand held cutters [3351]
7. XM4400 User's Guide [3355]
Unpacking and Assembly of the Cart
It is necessary to have two people unpack and assemble the cart and laminator. Unpack the contents,
lay them out on a table or floor and check vs. the contents list above. If you are missing any items,
please contact customer service [See contact information in the back of this manual].
.
4