Xyron XM4400 Instruction Manual page 10

Assembled Machine Cart
Unpacking and Positioning the Machine
To begin unpacking, remove the packing from around the machine. CAUTION: The machine weighs
155 Lbs [70.45 Kg], have someone assist you in lifting the machine onto the mobile stand. Please
lift from under the ends of the machine. DO NOT LIFT USING ANY OF THE ROLLERS.
Remember when lifting to bend your knees and keep your back straight to prevent over stressing and
possible injury to your back. Remove the packaging from around the machine.
Position the machine ends over the top bars on the cart. On the underside of each end of the machine
there are two threaded holes. These holes need to align over the holes in the top bars of the cart.
Install the four bolts up through the holes in the bars and into the threaded holes. Turn the bolts in as
far as possible by hand. Then tighten all four bolts with the supplied Allen wrench.
9