Dock Board - HP Pavilion x2 User Manual

Dock board

Description
Dock board (includes cable)
Before removing the dock board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
on page
5. Remove the tablet cover (see
6. Disconnect the battery cable (see
7. Disconnect the docking cable (see
To remove the dock board:
1. Remove the two Phillips PM2.0×3.0 screws (1) that secure the board to the tablet.
2. Lift the dock board from the tablet (2).
Reverse this procedure to install the dock board.
25).
Tablet cover on page
Releasing the tablet from the keyboard dock
43).
Battery cable on page 45).
Cables, docking and touch on page
Spare part number
765992-001
46).
Tablet components 55