Table Of Contents - Viking D3 Installation Manual

Table of Contents

Warnings & Important Safety Instructions_____________________________________________________3
Dimensions __________________________________________________________________________________6
Specifications ________________________________________________________________________________7
Clearance Dimensions (Proximity to Cabinets) ________________________________________________8
Clearance Dimensions (Wood/Composite Overlay) ___________________________________________9
Electrical & Gas Requirements ______________________________________________________________10
General Information ________________________________________________________________________12
Installation __________________________________________________________________________________13
Backguard Installation __________________________________________________________________13
Door Removal __________________________________________________________________________13
Leg Installation _________________________________________________________________________14
Electrical Connection (3-Wire)___________________________________________________________15
Electrical Connection (4-Wire)___________________________________________________________17
Leveling/Adjustments/Alignment________________________________________________________19
Anti-tip Device Installation ______________________________________________________________20
Wall Mount Anti-tip Installation _________________________________________________________20
Floor Mount Anti-tip Installation ________________________________________________________21
Connecting Gas & Electrical ____________________________________________________________22
Final Installation ________________________________________________________________________23
Door Replacement and Adjustment _____________________________________________________24
Final Preparation____________________________________________________________________________25
Performance Checklist ______________________________________________________________________25
Service & Registration ______________________________________________________________________26
2
IMPORTANT-
Read and ollow!
Your safety and the safety of others is
• Before beginning, please read these
very important.
instructions completely and carefully.
We have provided many important safety
messages in this manual and on your
• DO NOT remove permanently affixed
appliance. ALWAYS read and obey all
labels, warnings, or plates from product.
safety messages.
This may void the warranty.
• All local and national codes and ordinances
must be observed. Installation must
All safety messages will be preceded by
conform with local codes or in the absence
the safety alert symbol and the word
of codes, the National Fuel Gas Code ANSI
"DANGER," "WARNING" or "CAUTION."
Z223.1/NFPA-54 - latest edition.
These words mean:
• The installer must leave these instructions
with the consumer who should retain for
local inspector's use and for future
reference.
In Canada: Installation must be in accordance
with the current CAN/CGA B149.1 & 2 Gas
Installation codes and/or local codes. Electrical
which COULD result in severe personal
installation must be in accordance with the
current CSA C22.1 Canadian Electrical Codes
Part 1 and/or local codes.
In Massachusetts: All gas products must be
COULD result in minor personal injury or
installed by a "Massachusetts" licensed
plumber or gasfitter. A "T" type handle
manual valve must be installed in the gas
supply line to the appliance. hazard, tell you how to reduce the chance
of injury, and tell you what can happen if
3
This is the safety alert symbol. This
symbol alerts you to hazards that
can kill or hurt you and others.
DANGER
Hazards or unsafe practices
which WILL result in severe personal
injury or death.
WARNING
Hazards or unsafe practices
injury or death.
CAUTION
Hazards or unsafe practices which
property damage.
All safety messages will identify the
the instructions are not followed.