Kenwood Nexedge NX-200G Instruction Manual page 14

INSTALLING THE CAP OVER THE UNIVERSAL CONNECTOR
Insert the cap into place over the
universal connector and secure it
in place using the attached screw.
INSTALLING THE (OPTIONAL) SPEAKER/ MICROPHONE OR
HEADSET
1 Insert the guide of the speaker/ microphone or headset
connector into place over the universal connector.
2 Secure the connector in place using the attached screw.
Note: When not using an optional speaker/ microphone or headset,
install the cap over the universal connector.
4
Optional
speaker/ microphone
Universal
connector cap