JVC KD-BT1 Instructions Manual page 43

Symptom
• Disc cannot be played back.
• CD-R/CD-RW cannot be played back.
• Tracks on the CD-R/CD-RW cannot be skipped.
• Disc can neither be played back nor ejected.
• Disc cannot be recognized ("No Disc," "Loading
Error," or "Eject Error" flashes).
• Disc sound is sometimes interrupted.
• "Please Eject" appears on the display.
• Disc cannot be played back.
• Noise is generated.
• A longer readout time is required ("File Check"
keeps flashing on the display).
• Tracks do not play back in the order you have
intended them to play.
• Elapsed playing time is not correct.
• "Please Eject" appears on the display.
• "Not Support" appears on the display and track
skips.
• Correct characters are not displayed (e.g.
album name).
Remedy/Cause
Insert the disc correctly.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component which you
used for recording.
• Unlock the disc (see page 11).
• Eject the disc forcibly (see page 3).
Eject the disc forcibly (see page 3).
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
This occurs sometimes due to over-heating. Eject the disc
or change to another playback source.
• Use a disc with MP3/WMA/AAC tracks recorded in the
format compliant with ISO 9660 Level 1, Level 2, Romeo,
or Joliet.
• Add the extension code <.mp3>, <.wma>, <.m4a> to
the file names.
Skip to another track or change the disc. (Do not add
the extension code <.mp3>, <.wma>, or <.m4a> to
non-MP3/WMA/AAC tracks.)
Do not use too many hierarchies and folders.
Playback order is determined when files are recorded.
This occurs sometimes during play. This is caused by how
the tracks are recorded on the disc.
Insert a disc that contains MP3/WMA/AAC tracks.
Skip to the next track encoded in an appropriate format or
to the next non-copy-protected WMA track.
This unit can only display letters (capital: A – Z,
small: a – z), numbers, and a limited number of symbols
(see page 37).
Continued on the next page
REFERENCES 43