Digital Noise Reduction Function Setting [Dnr]; Black-And-White Mode Setting [D&N (Ir) ]; Cp310 Cp310; [D&N (Ele) ] - Panasonic WV-CP310 Operating Instructions Manual

Step 1
Set "WHITE BAL" to "ATW1", "ATW2" or "AWC" and press the [SET] button.
→ The fine adjustment screen appears.
Step 2
Move the cursor to "R" and "B" and press the [LEFT] or [RIGHT] button to fine adjust the level for each. "R" stands for red and "B"
stands for blue.
When the level indicator moves in the "+" direction, the color becomes deeper, and when the level indicator moves in the "–"
direction, the color becomes lighter.
Step 3
Move the cursor to "AREA" and press the [SET] button to enter "AREA" setting screen.
The area to detect white area of white balance can be set on the area setting screen. The area to detect white area of white balance
is displayed full-screen by default.
To change the white balance detection area, start from step 4.
Step 4
Move the cursor to "POSITION" and press the [SET] button.
Step 5
Press the [UP], [DOWN], [RIGHT] and [LEFT] buttons to move to the upper-left part of the area to be set, and press the [SET] button.
Step 6
Press the [UP], [DOWN], [RIGHT] and [LEFT] buttons to move to the lower-right part of the area to be set, and press the [SET] button.

7. Digital noise reduction function setting [DNR]

The digital noise reduction function reduces noise automatically under the condition of low illuminance.
The effect level of the noise reduction function is selectable from the following.
LOW: Low level of noise reduction (small residual image)
HIGH (default): High level of noise reduction (large residual image)
8. Black-and-white mode setting [D&N (IR) ]
The settings relating to the black-and-white mode can be configured.
Follow the procedure below
"CAMERA SETUP" screen
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
D&N(IR)
AUTO1
VMD OFF
RET TOP END
Step 1
Move the cursor to "D&N (IR)" and select the mode from the following.
AUTO1 (default): Automatically switches between color and black-and-white images in accordance with the illuminance. The
CP310
black-and-white mode is selected for dark images, and the color mode is selected for bright images.
CP310
CP300
[D&N (ELE) ]
"D&N (IR)" screen
**D&N(IR) **(1)
AUTO1
LEVEL HIGH
. I ..
DURATION TIME
S L
BURST(BW) ON
RET TOP END
CP310
CP310
CP310
CP310
CP300 CF354 CF344
CP300
15