Panasonic WV-CP160 Operating Instructions Manual
Panasonic WV-CP160 Operating Instructions Manual

Panasonic WV-CP160 Operating Instructions Manual

Color cctv camera
Hide thumbs Also See for WV-CP160:

Advertisement

(Lens Option)
please read these instructions carefully and save this manual for future use.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SER-
VICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrow-
head symbol, within an equilat-
eral triangle, is interned to alert
the user to the presence of
uninsulated "dangerous volt-
age" within the product's enclo-
SA 1965
sure that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
The exclamation point within
an equilateral triangle is intend-
ed to alert the user to the pres-
ence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.
SA 1966
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
PREFACE
Panasonic's WV-CP160 color digital camera introduces a new level of high picture quality
and high resolution through the use of a 1/3-inch interline transfer CCD image sensor having
768 horizontal pixels (picture elements), and digital signal processing LSIs. This model
offers cutting-edge technology for advanced video surveillance. This VP multiplex camera
can be connected with specified monitor by single coaxial cable.
PRECAUTIONS
1. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no user serviceable parts inside. Ask a qualified service person for servicing.
2. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged
by improper handling or storage.
3. Do not expose the camera to rain or moisture, or try to operate it in wet areas.
Turn the power off immediately and ask a qualified service person for servicing.
Moisture can damage the camera and also create the danger of electric shock.
4. Do not use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty.
In case the dirt is hard to remove, use a mild detergent and wipe gently.
5. Clean the CCD faceplate with care.
Do not clean the CCD with strong or abrasive detergents. Use lens tissue or a cotton
tipped applicator and ethanol.
6. Never face the camera towards the sun.
Do not aim the camera at bright objects. Whether the camera is in use or not, never
aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may
be caused.
7. Do not operate the camera beyond the specified temperature or humidity.
Use the camera under conditions where temperature is between –10°C - +50°C (14°F -
122°F), and humidity is below 90%.
Before attempting to connect or operate this product,
Color CCTV Camera

Operating Instructions

Model No.
N0200-0
YWV8QA5390AN
NOTE: This equipment has been tested and
found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful interfer-
ence when the equipment is operated in a
commercial environment. This equipment gen-
erates, uses, and can radiate radio frequency
energy and, if not installed and used in accor-
dance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential
area is likely to cause harmful interference in
which case the user will be required to correct
the interference at his own expense.
FCC Caution: To assure continued compli-
ance, (example - use only shielded interface
cables when connecting to computer or
peripheral devices). Any changes or modifica-
tions not expressly approved by the party
responsible for compliance could void the
user's authority to operate this equipment.
The serial number of this product may be found
on the top of the unit.
You should note the serial number of this unit
in the space provided and retain this instruction
as a permanent record of your purchase to aid
identification in the event of theft.
Model No.
Serial No.
WV-CP160
Printed in Japan
N 19
For U.S.A

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic WV-CP160

  • Page 1: Operating Instructions

    To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. PREFACE Panasonic's WV-CP160 color digital camera introduces a new level of high picture quality and high resolution through the use of a 1/3-inch interline transfer CCD image sensor having 768 horizontal pixels (picture elements), and digital signal processing LSIs.
  • Page 2: Major Operating Controls And Their Functions

    (4) Electronic Shutter Function 2. Signal-to-noise ratio of 50 dB 3. Minimum illumination of 0.8 lx (0.08 footcandle) with F 1.4 lenses. 4. Minimum illumination of 0.4 lx (0.04 footcandle) with Panasonic aspherical high speed (F0.75) lenses. 5. 480 lines of horizontal resolution...
  • Page 3: Mounting The Lens

    6. High quality picture: (a) 2H type vertical enhancer for greater picture sharpness (b) Chroma averaging circuit for better color signal-to-noise ratio (c) Minimum of aliasing on fine objects (d) Expanded dynamic range by use of knee circuit (e) Highlight aperture correction for greater picture detail of bright objects 7.
  • Page 4: Focus Or Flange-Back Adjustment

    FOCUS OR FLANGE-BACK ADJUSTMENT The following adjustment should be made by qualified service personnel or system installers. 1. Loosen the screw on the side of the camera. 2. Turn the flange-back adjusting ring to Flange-back the desired position. Adjusting Ring Caution: Do not rotate the ring coun- terclockwise by force after it stops.
  • Page 5: Dimensions Of Mounting Bracket

    DIMENSIONS OF MOUNTING BRACKET Caution on installation Use wood screws with the cam- 90° 83.5 (3-5/16) era mounting bracket that are suitable for Installation into a wood base appropriate dimensions and strength. For installation in a material other than wood, refer servicing to qualified service personnel.
  • Page 6 • Editing the SPECIAL Menu To edit the SPECIAL menu (change set- tings), proceed as for editing the CAM SET ** SPECIAL ** UP menu above. Move the cursor to END UP SIDE DOWN OFF CHROMA GAIN ..I..after the SET UP ENABLE appears. Then AP GAIN ..I..
  • Page 7: Setting Procedures

    1. Move the cursor to POSI, and press The display shown below appears and Highlighted the CAMERA ID is highlighted. WV-CP160 2. Move the CAMERA ID to the desired position by pressing 3. Press to fix the position of the CAM- ERA ID.
  • Page 8 2-2. ALC Mode with SUPER-D2 OFF and ELC Mode Note: If ELC is selected, set MASK SET according to this procedure. 1. Move the cursor to the SUPER-D2 parameter and select OFF. (When you ** ALC CONT ** select ELC, SUPER-D2 is not avail- BACK LIGHT COMP able.) The item MASK SET appears on SUPER-D2...
  • Page 9 6. White Balance Setting (WHITE BAL) 6-1. Auto-Tracing White Balance Mode (ATW) You can select one of two modes for white balance adjustment as follows: • ATW (Auto Tracing White Balance) In this mode, the color temperature is monitored continuously and thereby white bal- ance is set automatically.
  • Page 10: Special Menu

    7. Special Menu This menu lets you adjust and set up the video signal of the camera ** SPECIAL ** to meet your requirements. ** CAM SET UP ** CAMERA ID UP SIDE DOWN OFF Move the cursor to END on the ALC/ELC CHROMA GAIN ..I..
  • Page 11: Prevention Of Blooming And Smear

    PREVENTION OF BLOOMING AND SMEAR When the camera is aimed at a bright light, such as a spotlight, or a surface that reflects bright light, smear or blooming may appear. Therefore, the camera should be operated carefully in the vicinity of extremely bright objects to avoid smear or blooming. Smear Bright object SPECIFICATIONS...
  • Page 12 Panasonic Security and Digital Imaging Company A Division of Matsushita Electric Corporation of America Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Regional Offices: Northeast: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303 Southern: 1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30024 (770) 338-6838...

Table of Contents