Connecting The Cables; Attaching The Cable Clamps And The Ac Adapter Holder - Roland Picza LPX-600 User Manual

2-3 Connecting the Cables

When you connect the cables to the machine, use the included cable clamps and AC adapter holder.

Attaching the Cable Clamps and the AC Adapter Holder

Attach the cable clamps and the AC adapter holder to the back of the machine.
Cable clamps
Peel off the double-
sided tape and attach.
Connecting the Cables
WARNING
WARNING
WARNING
WARNING
WARNING
18
Do not use with any electrical power supply that does not meet the ratings dis-
played on the AC adapter.
Use with any other power supply may lead to fire or electrocution.
Never use any AC adapter and power cord other than the AC adapter and power
cord included with the machine.
Doing so may lead to fire, electrical shock, or electrocution.
Never damage the power cord or pull it with force.
Doing so may tear the cord's insulation, causing an electrical short and resulting in
electrical shock, electrocution, or fire.
Never place any object on the power cord, bend the power cord using excessive
force, or allow the power cord to become deformed.
If it becomes deformed, the deformed location may grow hot and cause fire.
Do not use with a damaged AC adapter, power cord or plug, or with a loose elec-
trical outlet.
Doing so may lead to fire, electrical shock, or electrocution.
AC adaptor holder
Secure in place using the retaining
screws for the head (the two Y
screws on the previous page).
Y screws