Installing And Setting Up The Software; Installing The Driver - Roland Picza LPX-600 User Manual

2-4 Installing and Setting Up the Software

Here you connect the machine to your computer and install and set up the included software on the computer, enabling
you to perform scanning with the machine.

Installing the Driver

Be sure to follow this procedure to install the driver. Failure to do so may make installation impossible.
 Go to "5-1 What to Do If ...," see "What to Do If Installation Is Impossible."
Procedure
Windows XP

Start Windows and log on as "Administrator."



USB connector
The back of
the machine
20
Insert the Roland Software Package CD-ROM into
the CD-ROM drive.
The window shown in the figure appears automatically.
Press the power button.
These lights flash
clockwise two at a time.
USB cable
Computer
USB port
Switch on the machine.
Wait a short while until the lights stop flashing.
The flashing continues for about one minute.
From this point on, keep the door closed until
installation ends. Failure to do so switches off
the power, which may prevent installation from
completing correctly.
Connect the included USB cable.
The [Found New Hardware Wizard] dialog box
appears.