Hdd Module And Dummy Module - Fujitsu Primergy RX200 S4 Operating Manual

CSS components
8.1.2.1

HDD module and dummy module

The hard disk drives which can be ordered for the PRIMERGY RX200 S4 are
supplied already mounted in an installation frame so that defective drives can
be replaced and new drives can be added during operation. The hard disk drive
and installation frame together make up the HDD module.
1
Figure 20: 3.5-inch HDD module and dummy module
1 HDD module (installation frame with hard disk drive installed)
2 Indicators
HDD Busy (LED green)
HDD Fault (LED orange)
For description see section
page 61.
3 Handle for locking and unlocking the HDD module
4 Button for locking and unlocking the handle
5 Ridge for applying a sticker with the current drive name
6 Dummy module
7 Tabs for unlocking the dummy module
RX200 S4
2 3 4 5
"Hard disk drive control indicators" on
Operating manual
Hot-plug components
4
6 7
87