Startup and operation
5.3.4
Configuration with ServerStart
The ServerStart DVD supplied allows you to conveniently configure the server
and install the operating system. Menu-guided configuration includes server
configuration with the SCU and RAID controller configuration with ServerVie-
wRAID.
The ServerStart advantages
– Automatic configuration of your server's hardware and disk arrays.
– Installation assistance for all leading server operating systems.
– Creation of configuration files for unattended installation of several
PRIMERGY servers with identical hardware configurations.
– Installation of drivers and additional software.
I
The software that can be installed depends on your server's hardware
configuration. This configuration is detected automatically.
I
Descriptions of operating systems not covered in the RAID controller
manual are provided in the appropriate readme files on the driver CDs.
To find out how to operate ServerStart and for further information, refer to the
corresponding manual.
If you are using ServerStart, you can skip the following section on how to
configure the server and install the operating system. Continue from section
"Cleaning the server" on page
RX200 S4
73.
Operating manual
Configuring the server
71