Switching The Server On And Off - Fujitsu Primergy RX200 S4 Operating Manual

Startup and operation
5.2

Switching the server on and off

V
CAUTION!
If nothing appears on the screen but flickering stripes after switching on
the server, switch the server off immediately (see section
stripes on monitor screen" on page
The On/Off button does not disconnect the server from the mains. To
disconnect from the mains completely, remove the power plug(s).
Switching the server on
The power-on indicator (item 10 in
– Starting up for the first time:
Ê Press the On/Off button (item 5 in
Power-on indicator (item 6 in figure
Ê Insert ServerStart DVD in the DVD drive.
Ê Follow the on-screen instructions (see also section
ServerStart" on page 71
on page 72).
– System already installed:
Ê Press the On/Off button (item 5 in figure
Power-on indicator (item 6 in figure
The server is switched on, performs a system test and boots the
operating system.
RX200 S4
Switching the server on and off
79).
figure 12 on page
figure 12 on page
12 on page
or section "Configuration without ServerStart"
12 on page
12 on page
Operating manual
"Flickering
57) lights orange.
57).
57) lights green.
"Configuration with
57).
57) lights green.
67