TROUBLESHOOTING
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSES
The Hot Water LEd
•
Hot Water dial is Open.
flashes when the machine
is turned On
The Steam LEd flashes
•
Steam Lever is Open.
when the machine is
turned On
Water does not flow from
•
Machine has not
reached operating
the group head
temperature.
•
Water tank is empty.
•
Water tank not fully
inserted & locked.
FILL TANK On in LCd
•
Water tank is not fully
display, but water tank
inserted and locked
into position.
is full
No Steam or Hot Water
•
Machine is not turned
on.
No Hot Water
•
Water tank is empty.
No Steam
•
Steam Wand is blocked.
WHAT TO dO
Turn the Hot Water dial to
the CLOSED position.
Move the Steam Lever to
the CLOSED position.
Allow time for the machine
to reach operating
temperature. The POWER
light will stop flashing
when machine is ready.
Fill Tank.
Push water tank in fully
and lock latch closed.
Push water tank in fully
and lock latch closed.
Ensure the machine is
plugged in, switched On
at the power outlet and the
POWER button is On.
Fill water tank.
Use the pin on the cleaning
tool to clear the opening. If
the steam wand continues
to be blocked remove the
tip of the steam wand using
the spanner in the cleaning
tool and soak in hot water.
31