Sony UP-980 User Manual page 89

Adjusting the print area (printout size)
This subsection explains how to adjust the print area using the example.
Note
The values adjusted on each sub menu remain even if the printer is turned off.
The following examples of the printer window display indicate the values
automatically adjusted in auto scan mode when the NTSC signal is input.
Adjustment on the H-SHIFT sub menu
Specifies the horizontal shift value in dots.
The following printer window display shows the value set in auto scan mode.
_
H S H I F T :
1 9 4 d o t s
Example: When the left portion of the printout is missing with above setting;
Reduce the H-SHIFT value.
H-SHIFT H-SIZE
V-SHIFT
V-SIZE
Input image
Print area (Printout size)
_
H S H I F T :
1 8 4 d o t s
When the H-SHIFT value is set to 184 dots;
H-SHIFT H-SIZE
V-SHIFT
V-SIZE
Input image
Print area (Printout size)
The print area shifts to the left by
10 dots.
Connection and Adjustment 89