Block Setting; Registering A Group In A Block; Registering A Block Name - Mitsubishi Electric G-50A Operation Manual

5-5 Block Setting

Display the page needed to perform the G-50A block setting by clicking [Initial Setting]-[Block Setting] in the
setting menu pane. On this page, you perform the settings required for the block that the groups make up.
Performing the block setting makes it possible to monitor, from a Web Monitor screen, a list of operation statuses
of groups belonging to the block and collectively carry out operations for the entire block.
Click [Get from G-50A] to get data currently stored on the G-50A, or click [Set to G-50A] to send setting data to
the G-50A.

5-5-1 Registering a group in a block

Enter the block number in the [Block No.] filed and click the group button that has the air conditioner group on it.
For example, when registering a unit of M-NET Group [1] to Block [1], set the Block No. field to [1] and click on
the button with the group number [1]
one more time and it will revert to being unselected
group buttons that you want to register as described above and the buttons will become selected.

5-5-2 Registering a block name

Enter the block number that you wish to register a name for in the [Block No.] field and in the [Block Name] field,
set a block name to show on the Web screen. A maximum of 20 alphanumeric or symbol characters can be used
for this name.
Note: The following characters cannot be used in the block name: < > & " '
Block Number
Enter the block number to be registered.
Get from G-50A
Read block setting from G-50A.
, and it becomes selected
. To register multiple groups in the same block, click on the
-16-
Block Name Setting
Register a block name to show on the Web screen.
. To cancel the selection, click on the button
Group Buttons
Register the groups to be included
in the block.
Set to G-50A
Send block setting to G-50A