Camera Selection Panel - Panasonic WJ-NV200VK Operating Instructions Manual

List display area
Number of data: Displays the total number of list-
ed data.
No: The number will be displayed in the order of
occurrence.
Date & List: Date & time when an event or trouble
occurred will be displayed.
Log: Details of the occurred event are displayed.
The following are the maximum number of logs that
can be saved. When the number of logs exceeds the
limit, the older logs will be overwritten by the newer
logs. In this case, the oldest log is the first to be over-
written.
Alarm logs: Up to 750
Error logs: Up to 1000
Access logs: Up to 100
Network log Up to 100

Camera selection panel

Clicking the [Cam. select] button will display the operation panel shown below. Switch the image display area
and select camera images.
For the [Multiscreen] box, [Wide view] box and [Digital zoom] box, refer to "Control Panel" (☞ page 62).
Camera selection box
Clicking the camera title will display images from the
selected camera on a 1-screen in the image display
area.
Clicking date & time in the list can start playback from
that date & time. (When clicking date & time in the log
information, playback will be started from a point
approx. 5 seconds before the date & time selected.)
To display search results or a list of copied data, refer
to "Search and play recording events" (☞ page 73)
and "Check a list of copied recorded images"
(☞ page 77), respectively.
Note:
• To start playback from the beginning of the pre-
event recording when the "Pre-event duration"
setting is longer than 5 seconds, click the play-
back button, and then click the previous record
button.
• The corresponding recorded data that is displayed
in the selected log list or log information cannot
be played if the data has already been overwritten
or erased.
Camera selection box
63