Panasonic WJ-NV200VK Operating Instructions Manual page 27

The functions of the buttons are as follows:
Function Example
Playback button
Stop button
Pause button
Captured image button
Next image/
Previous image button
Fast forward/
Fast reverse button
Next record/
Previous record button
[Go to last] button
Playback status display
Wide view button
Non-display button
(Displayed during play-
back on a full screen)
Operation
Plays recorded images.
Clicking this button while playback is paused will cancel the pause status.
When the playback button is clicked during fast playback/fast reverse playback, the
playback speed will be x1.
Playback will stop and live images will be displayed when this button is clicked dur-
ing playback/pause.
Playback will be paused when this button is clicked during playback.
Pause will be canceled when this button is clicked during playback/pause.
Saves images paused during playback on SD memory card.
Clickable only while playback is paused on a 1-screen. When this button is clicked,
the button will turn gray, and images will be saved. The SD memory card can be
removed when the button becomes available. ("About captured images" ☞ page 35)
When the next image button is clicked during pausing, the next frame is played and
paused.
When the previous image button is clicked during a pause, the previous frame is
played and paused.
Note:
When playing H.264/MPEG-4 images, some frames of recorded images will not
be displayed. Reverse frame-by-frame playback will be performed with the
refresh interval setting of the camera.
Playback speed of fast playback will be changed in the following order each time
the fast forward button is clicked:
Step2 (Approx. 2x) → Step3 (Approx. 4x) →
Step4 (Approx. 8x) → Step5 (Approx. 16x) →
Step6 (Approx. 32x) → Step7 (Approx. 48x)
Playback speed of fast reverse playback will be changed in the following order each
time the fast reverse button is clicked:
Step2 (Approx. 2x) → Step3 (Approx. 4x) →
Step4 (Approx. 8x) → Step5 (Approx. 16x) →
Step6 (Approx. 32x) → Step7 (Approx. 48x)
The playback speed will be displayed on the playback status display.
Note:
When playing H.264/MPEG-4 images, some frames of recorded images will not
be displayed. Except for x2 fast playback speed, fast playback/fast reverse
playback will be performed with the refresh interval setting of the camera.
Clicking the next record button will play back the next later recording.
Clicking the previous record button will play back the next earlier recording.
When there is no next/previous recorded image to be skipped to, the current play-
back will continue.
When this button is clicked, playback of the latest recorded images will start. The
starting point is around 30 seconds before the date & time of the latest recorded
images.
The status of the recorder such as the playback status, pause status etc. will be dis-
played.
The playback speed will be displayed in fast forward/fast reverse mode.
When this button is clicked during playback, the recorded images will be displayed
on a full screen. Clicking the [Ctrl screen] button during playback on a full screen will
return the image display to the previous status.
Hides the playback operation panel and the date & time operation panel. These
panels can be displayed again by the mouse operations.
27