Panasonic WJ-NV200VK Operating Instructions Manual page 23

Change the camera display position on the screen
The default camera display positions are as follows:
When the screen segments are not equally divided by the setting (Default)
3-screen
3-screen
2
1
2
3
1
3
When the screen segments are equally divided by the setting (4:3)
1-screen
1-screen
1
1
When the screen segments are equally divided by the setting (16:9)
1-screen
1
It is possible to change the camera image by dragging & dropping the number of the camera number panel (1
to 16) onto the desired display position.
Note:
• When a camera is assigned to a screen segment to which another camera is already assigned, the image of
the camera originally assigned to that position will disappear.
• The assigned camera position is retained even if the recorder is rebooted (note however that initializing the
settings will also reset the camera positions to the defaults).
• The audio of the camera assigned to the top left position will be output.
• If "Mute" was selected on the control screen, no audio will be output.
• The size of displayed images will be fit into the screen regardless of the aspect ratio.
6-screen
6-screen
1 2 3
1 2 3
4 5 6
4 5 6
4-screen
4-screen
1 2
1 2
3 4
3 4
4-screen
1 2
3 4
23
9-screen
9-screen
1 2 3
1 2 3
6 7
4 5
8 9
6 7
4 5
8 9
12-screen
12-screen
1 2 3 4
1 2 3 4
5 6 7 8
5 6 7 8
9 10 11 12
9 10 11 12
9-screen
1 2 3
4 5 6
7 8 9
16-screen
16-screen 2 3 4
1
5 6 7
2 3 4
1 8 9 10
5 6 7
11 12 13 14 15 16
8 9 10
11 12 13 14 15 16
16-screen
1 2 3 4
16-screen
5 6 7 8
1 2 3 4
9 10 11 12
5 6 7 8
13 14 15 16
9 10 11 12
13 14 15 16
16-screen
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16