Safety Instructions - Bosch FPC-500-2 Operation Manual

Conventional fire panel
Hide thumbs Also See for FPC-500-2:
Table of Contents

Advertisement

4
en | Safety Instructions
1

Safety Instructions

CAUTION!
Only silence alarms once you have ensured that no persons will
be endangered by the deactivation of the sirens.
CAUTION!
Only switch zones to test mode for brief periods of time. Zones
in test mode will not trigger an alarm in the event of a fire.
CAUTION!
Only deactivate zones for brief periods of time. Deactivated
zones will not trigger an alarm in the event of a fire.
NOTICE!
Your fire detection system and all connected components must
be subjected to professional maintenance on a regular basis.
Observe all local regulations.
DANGER!
The housing must only be opened by a specialist. There is a
danger of electric shock.
CAUTION!
Do not deactivate the power supply to the fire detection
system. After using up the emergency power supply, the fire
detection system will be unable to trigger a fire alarm.
NOTICE!
If you encounter any irregularities during the operation of your
fire detection system (fault messages etc.), contact your
specialist immediately.
F.01U.172.982 | 5.0 | 2012.04
Operation Guide
Conventional Fire Panel
Bosch Sicherheitssysteme GmbH

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fpc-500-4Fpc-500-8

Table of Contents