Feature Descriptions - Clifford 3706X Owner's Manual

Note: The remote control will automatically exit the configuration
mode if no buttons are pressed for 30 seconds, letting the remote exit
programming on its own will not save any of the feature changes.

Feature Descriptions

Keypad Lock
Options: Off, Auto
When Off, the buttons do not lock and will always perform a com-
mand when pressed. When set to Auto, the remote buttons will lock
after a 20 second lapse between button presses to prevent uninten-
tional operations. If a button is pressed when locked a fault tone plays
as an alert.
To unlock the buttons, press the
Tones will play to confirm unlocking.
Note: If the button beeps have been turned off on the 1-way remote
then the remote will not respond to any button presses other than
the unlocking sequence. It is recommended to keep the button press
beeps programmed on.
Remote Beeps
Options: On, Off, Triggers Only
The Responder LE and companion remotes emit a beep as confirma-
tion of button presses this also applies to command responses and
trigger alerts for the 2-way remote control.
When set to Off, beeps will not be emitted for any operations except
for programming (including alarm triggers for the 2-way remote if ap-
plicable).
36 36
button followed by the button.
© 2014 Directed. All rights reserved.