Table of Contents
Advertisement
8. Vibrator Test: if device vibrates,test PASS, or FAIL.
9. Audio Test:
a. Check if the device sounds.
b. Check if the MIC can record and play.
c. Check if the receiver can sound.
d. Insert the headphone, check if the headphone sounds
e. Check if the headphone MIC can record and play. Tesk done and pull out the headphone.
Press "FINISH".
Notice: Please insert the headphone when do Step d and Step e. Then pull out the headphone after
Step e finished.
10. LED Test: LED will light in red, green and blue. Test ok to press "PASS", or "FAIL".
LED
24
TSD ■ Service Manual
V1.0
Advertisement
Table of Contents
