Brother DCP-J100 User Manual page 71

Level1 Level2
0.Initial Setup 1.Date&Time
2.LCD Contrast
3.Sleep Mode
4.Reset
5.Auto Power Off —
0.Local Language
(depending on
your country)
See Advanced User's Guide.
See Quick Setup Guide.
The factory settings are shown in Bold with an asterisk.
Level3 Options
— —
—
Light
Dark*
—
1 Min
2 Mins
3 Mins
5 Mins*
10 Mins
30 Mins
60 Mins
1.Machine Reset a Reset b Exit
2.Network a Reset b Exit
(DCP-J105)
2.All Settings a Reset b Exit
(DCP-J100)
3.All Settings
(DCP-J105)
Off*
1hour
2hours
4hours
8hours
— (Choose the
language you
want to use)
Menu and features tables
Descriptions
Sets the date and time in
your machine.
Adjusts the contrast of the
LCD.
You can choose how long
the machine must be idle
before it goes into Sleep
mode.
Resets all the machine's
settings that you have
changed, such as the
Date and Time.
Resets the print server
back to the factory
defaults, such as the
password and IP address
information.
Resets all the machine's
settings back to the
factory default.
Set the number of hours
you want the machine to
remain in Sleep Mode
before turning itself off.
When set to Off, the
machine will not power off
automatically.
Allows you to change the
LCD language.
Page
37
See .
58
C
See .
See .
65