Brother DCP-J100 User Manual page 19

b
Put envelopes in the paper tray with the
printing surface face down. If the
envelope flaps are on the long edge,
load the envelopes in the tray with the
flap on the left, as shown in the
illustration. Gently press and slide the
paper width guides (1) and paper length
guide (2) to fit the size of the envelopes.
If you have problems printing on
envelopes with the flap on the short edge,
try the following:
a
Open the envelope flap.
b
Put the envelope into the paper tray with
the printing surface face down and the
flap positioned as shown in the
illustration.
1
2
c
Select Reverse Print (Windows
Reverse page orientation (Macintosh)
in the printer driver's dialog box, and
then adjust the size and margin in the
application you are using.
For more information, see Software and
Network User's Guide: Reverse Print
(Windows
(Macintosh).
Loading paper
®
) or Reverse Print
2
2
®
) or
13