Advertisement
11
• • CAMERA ID
1. Press
use the camera identification(CAMERA ID) to assign a name to each
camera when you set the CAMERA ID ON.
2. The camera ID is up to 9 characters. The characters for setting the
ID of the cameras are: "Space", "0~9", "a~z", "A~Z". Just press
or
to change the cursor to another position
• • LOAD DEFAULT
1. Press
2. As soon as the default is loaded, EverFocus VER 1.0 will be shown
on the screen.
Caution:
1. You can also press
anywhere on the screen display mode.
2. Before "EverFocus VER 1.0" disappeared, please do not disable
the power of the camera otherwise the camera will be damaged.
• • NEXT PAGE
Move the cursor to NEXT PAGE and the press
PAGE.
E v e r F o c u s E l e c t r o n i c s C o r p .
or
to change the parameter of CAMERA ID. You can
to select your necessary characters and then move
SWITCH SETUP
EXPPOSURE
LINELOCK
AWB
DAY/NIGHT
CAMERA ID
LOAD DEFAULT
NEXT PAGE
EXIT
to reset the camera to the factory settings.
SET
SET
ES
ON
ON
ON
ON
EverFocus
together to load default
SET
to go to NEXT
,
Advertisement
