Advertisement
• • EXPOSURE
1. There are four modes of exposure for you to set on the screen. Use
and
to select the mode. The modes are: Electronics Shutter(ES),
Manual Exposure(ME), Flickerless(FL), and Auto Iris(AI).
2. You can do further setting on next page after selecting one of the
modes.
SWITCH SETUP
EXPPOSURE
LINELOCK
AWB
DAY/NIGHT
CAMERA ID
LOAD DEFAULT
NEXT PAGE
EXIT
• • LINELOCK
1. This item is used to make the vertical phase of the camera video
signal matched to the phase of AC power.
2. Move the cursor to the LINELOCK parameter and press
to select ON or OFF.
• • AWB
1. Normally the AWB( Auto White balance) is set to ON.
2. Just press
• • DAY/NIGHT
1. The camera is specially designed to have a clear black and white
picture under low light environment.
2. The default is DAY/NIGHT ON for you to install any place where
the light is varying. The camera will be Color and Black/White
switching automatically according the lighting.
E v e r F o c u s E l e c t r o n i c s C o r p .
ES
ON
ON
ON
ON
or
to change ON or OFF.
xxxxxxxxx
or
10
Advertisement
