Table of Contents
Advertisement
Connect to PC
This option allows you to transfer data between your phone and a
PC via a USB data transfer cable.
Correct
To connect the phone to a PC:
Connect one end of the USB Data Cable to your PC's USB
1.
port.
Plug the other end of the USB Data Cable into your Power/
2.
Accessory Interface Connector located on the side of the phone.
3.
Select Menu > Tools > Mass Storage > Connect to PC.
Note:
This procedure requires that a compatible memory card be installed
into the phone prior to connection with the PC.
(See "Using a microSD Memory Card in Your Phone" on page 26.)
Section 2G: Using the Phone's Scheduler and Tools
Camera
Interface
Connector
Incorrect
135
To display the current memory allocation:
1.
Select Menu > Tools > Mass Storage >
Memory Info.
Choose one of the following
2.
:
All -
both phone and memory card
memory
Phone -
only the phone's memory
allocations
Card -
only the card's memory
allocations
3.
Review the
Total
memory size, Current
Used
, and Total
Available
memory
Done
remaining, and select
(
exit this screen.
Using the Calculator
MENU
OK
Your phone comes with a built-in calculator.
To use the calculator:
1.
Select
Menu > Tools > Calculator. (The phone then deactivates
the Main LCD, and flips over to the Phone Display Screen.)
2.
Enter the first numbers using your phone's keypad.
Press the Navigation key up for
Multiplication (x).
Press the Navigation key down for
Division
(÷).
Press the Navigation key left for
Press the Navigation key right for
136
Section 2G: Using the Phone's Scheduler and Tools
and press
) to
LS
LS
Subtraction
(-).
Addition
(+).
Advertisement
Table of Contents
