Table of Contents
Advertisement
Dialing Options
MENU
OK
After entering numbers within standby mode, select
see the following dialing options:
To initiate an option, highlight it and press
(1) Save
: Enter a seven- or ten-digit
number (area code and phone number)
Options
> Save
and press
(
)
the phone number in your Contacts. (See
"Saving a Phone Number" on page 48.)
(2) Find:
Enter a digit or string of digits
Options
and press
(right softkey). Select
entries that contain the entered numbers. (See "Finding a Phone
Number" on page 49.)
(3) Hard Pause allows you to enter a hard pause (the phone
waits for user input). To continue dialing, you must press a key.
(See "Dialing and Saving Phone Numbers With Pauses" on
page 50.)
(4) 2sec Pause allows you to enter a two-second pause. The
phone will pause, then continue dialing without any additional
keys being pressed. (See "Dialing and Saving Phone Numbers
With Pauses" on page 50.)
Answering Calls
To answer an incoming call:
1.
Make sure your phone is powered on and is not locked (via the
Lock
phone
button). (If your phone is off, any incoming calls go
directly to voicemail, if available.)
2.
Press
to answer an incoming call. (See "Call Answer Mode"
on page 85 for more information.)
Your phone notifies you of incoming calls in the following ways:
The phone rings and/or vibrates.
Section 2A: Phone Basics
Options
(
) to
.
MENU
OK
to save
Find
to display Contacts
43
The backlight illuminates.
The screen displays an incoming call message.
If the incoming call is from a number stored in your Contacts, the
entry's name is displayed. The caller's phone number may also be
displayed, if available.
If Call Answer is set to
Talk Only
or the Main LCD, the following options
are displayed. To select an option, press the corresponding softkey
button.
Answer
to answer the call.
Note:
If you choose to accept/answer the phone while using the MP3 side
of the phone, the Main LCD shuts down and the phone side is then
activated.
Ignore
to send the call to your voicemail box.
Tip:
To quiet the ringer, make sure the phone is unlocked and press the
Back , End , or volume key.
Missed Call Notification
When an incoming call is not answered, the
Missed Call log is displayed on your currently
active screen.
To display the Missed Call entry from the
notification screen:
Highlight the entry and
press
. (To dial the phone
MENU
OK
number, press
).
– or –
Highlight the entry and press
To dial the phone number, select Call (
44
.
).
LS
LS
Section 2A: Phone Basics
Advertisement
Table of Contents
