Table of Contents
Advertisement
Pairing Bluetooth Devices
Paired Devices - Searching
The Bluetooth pairing process allows you to establish trusted
connections between your phone and another Bluetooth device. When
devices are paired, a passkey is shared between devices, allowing for
fast, secure connections while bypassing the discovery and
authentication process in the future.
To pair your phone with a Bluetooth headset:
1.
Verify your headset/device is powered and is configured for
pairing. (This typically involves configuring your headset/device
to transmit a signal that it is searching for a Bluetooth phone.)
2.
Select
Menu > Bluetooth > Trusted Devices
Add New.
(Your phone will search for and display discovered in-
range Bluetooth devices if any is available.)
3.
Select the device you wish to pair with and press
4.
Use the Navigation Pad to enter the numeric passkey and select
Done (
)
LS
LS
. You are then notified that Pairing is in progress.
Use your phone's keypad to enter a new Device Name for the
5.
device and press
to save and exit.
MENU
OK
Highlight the device and select
6.
Successful will be displayed if the device is communicating
properly.)
Note:
The M620 handset does not support Bluetooth headsets with MP4
files.
Section 2K: Using Bluetooth Wireless Technology
and press
for
.
for Connect. (Connection
LS
LS
193
Waiting for Pairing
If you are going to be using a Dial-Up Network (DUN) profile to pair with
a PC or PDA, you will need to allow the other device to initiate pairing
with your phone.
To allow your phone to be paired with another Bluetooth device:
1.
Verify your headset/device is powered and is configured for
pairing. (This typically involves configuring your headset/device
to transmit a signal that it is searching for a Bluetooth phone).
Menu > Bluetooth > Trusted Devices
2.
Select
3.
Press
LS
LS
for Add New.
4.
Select Wait for request and press
The visibility pop-up screen is displayed. Specify how long you
5.
want the handset to be visible.
6.
Enter your passkey and select
is displayed.
194
Section 2K: Using Bluetooth Wireless Technology
.
.
Done (
)
LS
LS
. "Waiting for Pairing"
Advertisement
Table of Contents
