3.
Grasp the edge of the memory module (2), and then pull it out of the memory module slot.
NOTE:
memory module slot.
Reverse this procedure to install a memory module.
Drives
NOTE:
The hard drive spare part kit and solid-state drive spare kit include a bracket.
Description
Hard drive (includes hard drive bracket):
●
500-GB, 7200-rpm
●
500-GB, 7200-rpm (for use with WWAN models only)
●
320-GB, 7200-rpm
●
320-GB, 7200-rpm (for use with WWAN models only)
●
250-GB, 7200-rpm
●
250-GB, 7200-rpm (for use with WWAN models only)
●
160-GB, 7200-rpm
●
160-GB, 7200-rpm (for use with WWAN models only)
Hard Drive Mounting Kit (includes mounting bracket and screws)
Solid-state drive, 128-GB
Before removing the hard drive or the solid-state drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
44
Chapter 4 Removal and replacement procedures
Memory modules are designed with a notch (3) to prevent incorrect insertion into the
Spare part number
609774-001
616991-001
609773-001
616990–001
609772-001
616989-001
611689-001
616988-001
608645-001
608639–001