Siemens OpenStage 40 SIP User Manual page 85

Step by Step
Complete Xfer
]
Settings
User
Configuration
Incoming calls
Handling
Allow call waiting
Connecting parties
Select and confirm the option shown in the active con-
nection's context menu. The other two parties are now
connected to one another. You can now hang up or dial
another number for instance.
or Connect by hanging up
Prerequisite: Connecting by hanging up is activated
(ask your service personnel) and "Toggle associate"
must be set to "Yes" (
connected by hanging up you must have toggled at
least twice (
n
or
Replace the handset or, if you are in speakerphone
mode, press the loudspeaker key. The other two parties
are now connected to one another.
Allowing call waiting
If the Call waiting (second call) function is deacti-
vated, a caller hears the busy signal if you are al-
ready conducting a call.
Prerequisite: The option was programmed by your ad-
ministrator.
z You can also configure this setting via the Web interface
page 176.
N
Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
j
if nec.
Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Enhanced phone functions
page 86). Before you can be
page 55).
85