Beginning Programming; Programming Enhanced Functions; Repertory Dial - Siemens OpenStage 40 SIP User Manual

Programmable sensor keys
Step by Step
Normal
Shifted
Do not disturb
Label
Save & Exit
OK
Normal

Repertory dial

Label
70

Beginning programming

Select and confirm the option shown to program the
first level.
or
Select and confirm the option shown to program the
second level.
Select and confirm the required function in the list (e. g.
Do not disturb).
Select and confirm the option shown if you want to
change the label on the graphic display.
j
Enter and confirm the label you want.
Select and confirm the option shown.

Programming enhanced functions

Repertory dial
S
Hold down the sensor key to which a function should be
assigned until the programming prompt is displayed.
If the prompt is not displayed or a programmed
function is not executed, then you can only launch
key programming via the user menu (ask your ser-
vice personnel about the current setting).
Confirm to begin programming. The sensor key illumi-
nates continuously.
z You can also configure this setting via the Web interface
page 176.
Select and confirm the option shown to program the
first level for instance.
Select and confirm the function in the context menu.
Select and confirm the option shown if you want to
change the label on the graphic display.
j
Enter and confirm the label you want.