Maintenance; Easi-Access Technology; Troubleshooting; Need Help - Fellowes Jupiter 125 Instructions Manual

MAINTENANCE - Unique Easi-Access technology
This laminator is equipped with the unique Easi-Access technology for easy maintenance. This allows the user to open the laminator for maintenance, just like a photocopier.
1
3 4 5
7
1. To open the laminator, please press
the "Open" ( ) button as shown in
the illustration. The red Open light will
illuminate.
5
5. Open the lid with both hands.
You are now able to clean the inside of
the laminator and carefully remove any
residual glue or other items.
When laminator is opened, power to
internal parts is isolated, so that user is
not in danger of electric shock.

TROUBLESHOOTING

1
3 4 5
7
Problem
Ready Light does not go on after extended time
Pouch did not completely adhere to item
Jamming

Need Help?

Please call our experts at
Customer Service. You'll find
the numbers for your nearest
Service Centre on the
back cover of this booklet.

LIMITED WARRANTY

Fellowes warrants all parts of the laminator to be free of defects in material and workmanship for 2 years
from the date of purchase by the original consumer. If any part is found to be defective during the warranty
period, your sole and exclusive remedy will be repair or replacement, at Fellowes' option and expense, of
the defective part. This warranty does not apply in cases of abuse, mishandling or unauthorized repair. ANY
IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS
HEREBY LIMITED IN DURATION
2
6
6. For further maintenance, the rollers
can be released by experienced users.
Press cam levers to release the rollers.
2
Cause
Laminator is in a hot, humid area.
Laminated item may be too thick.
No item in pouch
Manually cut out pouch used
Pouch was not used.
Pouch was not centred or straight when fed
through Pouch/Document Entry.
Glue and residue left on laminating rollers.
3
3 4 5
7
3. The "Wait" LED will turn off and the
ready beep will sound when machine is
ready to be opened.
7
7. To clean residue off laminator rollers,
please only use Fellowes Laminating
Roller wipes (item No 5703702) as
explained in their product instructions.
3
Move laminator to a cool dry area.
Pass through laminator a second time.
All our laminators have been designed to operate jam-free. In the unlikely
event of a jam occurring, please press the "open" ( ) button and wait
for the wait ( ) light to stop flashing.
The laminator can be opened to remove incorrectly inserted items
as described under maintenance. Please ensure that you follow the
described steps.
Gently pull on the jammed material to release it.
Always put item in a pouch.
Align sealed edge with Pouch/Document Entry. Use guide
on machine to centre.
Clean residues off rollers using Fellowes Laminating Roller wipes, see
"maintenance" section.
Make sure that not residue is left on the rollers and use
cleaning sheet before laminating.
TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. IN NO EVENT SHALL FELLOWES BE LIABLE
FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ATTRIBUTABLE TO THIS PRODUCT. This warranty
gives you specific legal rights. You may have other legal rights that vary from this warranty. The duration,
terms and conditions of this warranty are valid world-wide, except where different limitations, restrictions or
conditions may be required by local law. For more details or to obtain services under this warranty, please
contact us or your dealer.
4
4. Press the silver buttons on both sides of
the machine to activate the Easi-Access (The
laminator needs to be switched on to allow
the active temperature control to work).
8
8. Please remember to re-secure the
rollers before closing cover to ensure
safe operation.
5