Specifications - Sony STR-DH500 Operating Instructions Manual

130 Wlch
I
)Measured under the following conditions:
Specifications
2)Reference power output for front, center and
surround speakers. Depending on the sound field
settings and the source, there may be no sound
output.
-
: :s
0- ...
3
D)
-
o ·
::s
»
a.
a.
a:
o
::s
D)
-
10kHz step 9 kHz step
Tuning scale
530 kHz - 531 kHz-
1,710 kHz 1,710 kHz
±6 dB, I dB step
Voltage: 500 mV I
10 kohms
Voltage: 2 VII kohm
Sensitivity: 500 mVI
50 kohms
S/N
3 ):
96 dB
(A,
500 mV
4 })
Impedance: 75 ohms
SIN: 100 dB
(A, 20 kHz LPF)
SIN: 100 dB
(A, 20 kHz LPF)
U,CA
Area code
Antenna Loop antenna
Intermediate frequency
450 kHz
Video section
InputslOutputs
Video: I Vp-pl75 ohms
COMPONENT VIDEO:
Y: I Vp-pl75 ohms
PB/CB: 0.7 Vp-pl75 ohms
PRlCR: 0.7 Vp-pl75 ohms
80 MHz HD Pass Through
AM tuner section
Tuning range
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
3}INPUT SHORT (with sound field and tone
bypassed).
4)Weighted network, input level.
Digital (Optical)
Digital (Coaxial)
SUB WOOFER
Tone
Gain levels
Outputs (Analog)
AUOIOOUT
Inputs
Analog
120 V AC, 60 Hz
Power requirements
10 Hz -70 kHz
+0.5/-2 dB (with sound
field and tone bypassed)
U,CA
Area code
Frequency response
Analog
Amplifier section
Models of area code U, CA
I)
Minimum RMS Output Power (8 ohms, 20 Hz -
20 kHz, THO 0.09%)
90W
+
90W
Stereo Mode Output Power (8 ohms, I kHz,
THO 1%)
100W
+
100W
Surround Mode Output Power 2 ) (8 ohms, I kHz,
THO 10%)
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(Models of area code U only)
With 8 ohm loads, both channels driven, from
20 - 20,000 Hz; rated 90 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
continued------
61
us