4B: Connecting The Video Components - Sony STR-DH500 Operating Instructions Manual

4b: Connecting the video components
-
How
to connect
your,
componentS
,
.;~: ~c:'
-;
This section describes how to connect your
video components to this receiver. Before you
begin, refer to "Component to be connected"
below for the pages which describe how to
connect each component.
Before connecting cords, make sure to
disconnect the AC power cord (mains lead).
After connecting all your components,
proceed to "5: Connecting the antennas
(aerials)" (page 22).
Component to be connected
Component Page
TV 15
With HDMI jack
18
DVD player
20
Satellite tuner/Set-top box 21
DVD recorderNCR
22
Vide~,
ipput/output jacks to:be '
.1
connected
,t··· '., "
,~
The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
your components.
,@
~
"•. @
L~J
.<@
• •• 'Ol
..
Digital Analog
~----
High quality image
Note
Be sure to tum on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
17
US