Royal Sovereign ARP-9407CA Owner's Manual page 7

Part 2: Attaching exhaust hose
1.∙∙ H old∙the∙exhaust∙hose∙parallel∙to∙the∙floor∙with∙the∙hose∙connector∙positioned∙up∙and∙down∙
2.∙∙ L ine∙up∙the∙hose∙connector∙above∙the∙tabs∙on∙the∙exhaust∙outlet.∙∙Slide∙connector∙down∙into∙the∙tabs∙
locking the connector in place.
part 3: Installing window slider kit
1. Open the window and place the window slider on the inside edge of the window.
2. Adjust the window slider to the width of the window.
3. Insert a screw into the top of the window slider to secure it at the correct length.
4.∙∙ T ake∙window∙slider∙out∙and∙attach∙to∙exhaust∙hose∙by∙snapping∙the∙hose∙adapter∙into∙the∙hole∙on∙the∙window∙slider.∙∙Make∙sure∙that∙the∙tabs∙on∙the∙window∙slider∙are∙facing∙
outside.
5.∙Extend∙exhaust∙hose∙to∙desired∙length.
6. Place window slider and hose into the edge of the window.
7. Close window to secure slider.
Fig 3.
aRp-9407ca, aRp-9409ca
7
Fig 2.
Fig 4.